Give your constitute a little elevator with this piece of cake DIY leather plant holder! A while back when cement home decor pieces were trending, I got on board and made my own planter. I popped in a jade plant and prepare my planter on the windowsill in my kitchen since information technology was the perfect fit.  Even though my planter has been sitting on my kitchen windowsill for only a couple of years, I thought information technology was fourth dimension for an update.  I wanted to accept the ability to hang my establish, so I made a leather plant hanger!

Leather Plant Holder

This leather plant holder was really like shooting fish in a barrel to make.  I found some fleck leather I had stored in my craftroom, grabbed some pair of scissors and a gold ring and whipped this baby up in less than an hour.  I call up the leather gives the planter a chichi, sophisticated wait.  What do you think?

Leather Plant Holder

Supplies:

  • Long slice of leather (at least four′ long)
  • Gilded Metal Band
  • Cord
  • Craft Knife
  • Pair of scissors
  • Pen/Pencil
  • Ruler

Leather Plant Holder

Here's how to create your own leather found holder:

Wrap your string around the planter from 1 side to the other and cut it. This will give you the length for your leather pieces.

Leather Plant Holder

Your string will exist a guide to cut your leather strips. Y'all'll need 2 leather strips that are 1 inch wide and the length of your cord.

Leather Plant Holder

Use a ruler to make sure your strips are straight. Cut them out.

Leather Plant Holder

Draw rounded edges in all iv corners of each strip of leather. And then, cut along the lines y'all drew.

Leather Plant Holder

Add together a circle about a quarter of an inch in bore on both ends of each strip of leather.

Leather Plant Holder

Cut out the circles you drew.

Leather Plant Holder

Cut 2 strips of leather that are a half inch wide and 4 feet long.

Leather Plant Holder

Round the ends of both strips of leather.

Leather Plant Holder

Here's how to assemble your leather plant holder:

Slide the ii long strips of leather through your gold ring.

Leather Plant Holder

Next, push your long strip through the hole you cut in your 1-inch strip of leather.

Leather Plant Holder

Run the other end of the strip through the hole in the opposite. Tie knots on both ends.  Repeat these steps with the other long strip of leather and your remaining strip with holes cut in it.  Cantankerous your two wider strips of leather so they class a plus sign.  Place glue on the heart to adhere them together.

Leather Plant Holder

Lay your leather strips on the flooring and place your planter in the eye. All you need to practice is pull up the leather straps and hang your ring from a claw and you are skilful to go!

Leather Plant Holder

With this quick project, you lot tin can have your favorite planter off of the floor or windowsill and really put the spotlight on it with this fun and easy leather plant holder!